| REXROTH 4WE6R7X/HG24N9K4/B10 Valves | ra max.:2.5 mm; Fatigue load limit Pu:710 kN; B:25.5 mm; D:670 mm; d:560 mm; da min.:662 mm; r1,2 min.:3 mm; Mass bearing:58 kg; d1:665 mm; Da max.:584 mm; |
| REXROTH DBE30-3X/50YG24N9K4 Valves | Grease Speed Rating n1:1000 rpm; d:170.000 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:605000 N; Oil Speed Rating n2:1500 rpm; Basic Static Radial Load Rating Co:965000 N; D:360.0000 mm; Fillet Radius ra:3.00 mm; B:144.00 mm; |
| REXROTH 4WMM6D5X/V Valves | RG:3/4 NPT; Cap bolt recommended tightening torque:813.5 N·m; Ca:82.804 mm; Pa:105 kN; P180°:162 kN; Cap bolt:7/8-9 UNC; Cap bolt, SAE grade:8; Max. speed for PosiTrac Plus seal:850 r/min; P120°:149 kN; Da:269.999 mm; |
| REXROTH 4WE6B6X/OFEW230N9K4/V Valves | Material constant KM:330; dk:66 mm; d2 max.:114 mm; h:195 mm; Mass rod end:3.9 kg; l1 min.:110 mm; Basic static load rating C0:245 kN; d:50 mm; C1 max.:31 mm; l7 min.:58 mm; |
| REXROTH 4WMM6C5X/V Valves | b:6 mm; s:1.6 mm; Dynamic (Ca):79.4 kN; D:120 mm; Pu:10.060 kN; b1:11 mm; F:80 mm; rs (min):1.5 mm; d2 (max):85.6 mm; r1s (min):1.5 mm; |
| REXROTH DBW30B2-5X/200-6EG24N9K4/V Valves | Static axial stiffness, preload class B:105 N/µm; D:55 mm; Static axial stiffness, preload class C:138 N/µm; d2:36.4 mm; Basic static load rating C0:5 kN; Preload class C GC:480 N; Calculation factor f2B:1.03; Calculation factor (back-to-back, face-to-face) Y1:0.92; Reference grease quantity Gref:1.7 cm³; db min.:34.6 mm; |
| REXROTH ZDR6DP1-4X/75Y Valves | Grease Speed Rating Open/Shielded n1:4300 rpm; Basic Dynamic Radial Load Rating C:114000 N; D:160.0000 mm; Fillet Radius ra:2.00 mm; B:37.00 mm; Grease Speed Rating n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Oil Speed Rating n2:5000 rpm; Accessories:Snap-Ring; Sealed Speed Rating n3:2800 rpm; |
| REXROTH 3WE6B7X/HG24N9K4/V Valves | S:4.763 mm; Cap bolt:4 x 3/4-10 UNC; A2:307.975 mm; Appropriate attachment bolt size G:1 in; J max.:549.275 mm; R2:37.306 mm; P60°:234 kN; Stabilizing ring:SR-34-0; J1:107.95 mm; Taconite seal:TER 140; |
| REXROTH 4WE6A7X/OFHG24N9K4 Valves | D:95 mm; Tolerance housing:H7; Tolerance shaft:e7; a:2 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; D1:105 mm; d:80 mm; Coefficient of friction µ max.:0.15; Specific static load factor K0:45 N/mm²; |
| REXROTH Z2FS10-5-3X/SV Valves | Fillet Radius ra:2.50 mm; B:50.00 mm; Oil Speed Rating n2:3200 rpm; Basic Dynamic Radial Load Rating C:203000 N; Oil Speed Rating Open/Shielded n2:3200 rpm; Basic Static Radial Load Rating Co:180000 N; Sealed Speed Rating n3:1800 rpm; D:240.0000 mm; d:110.000 mm; Grease Speed Rating Open/Shielded n1:2600 rpm; |
| REXROTH 4WE6EB6X/OFEW230N9K4/V Valves | F:77 mm; rs (min):2.1 mm; b1:15.5 mm; Dynamic (Ca):121 kN; s:1.5 mm; d2 (max):85.3 mm; B:31 mm; Pu:13.900 kN; b:9 mm; Static (Coa):114 kN; |
| REXROTH 3WE6A7X/HG24N9K4/B10 Valves | B:44.40 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:3800 rpm; Accessories:No Shield, no Seal,; D:140.0000 mm; Grease Speed Rating n1:2800 rpm; d:80.000 mm; Basic Dynamic Radial Load Rating C:106000 N; Basic Static Radial Load Rating Co:95000 N; |
| REXROTH DBE10-3X/100YG24N9K4 Valves | Grease Speed Rating Open/Shielded n1:15000 rpm; D:47.0000 mm; Oil Speed Rating Open/Shielded n2:18000 rpm; d:25.000 mm; Accessories:Seal & Snap-Ring; B:12.00 mm; Basic Dynamic Radial Load Rating C:11200 N; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:6550 N; Sealed Speed Rating n3:9500 rpm; |
| REXROTH 4WE6R6X/EW230N9K4/B10 Valves | D:309.5 mm; a:146 mm; Mass bearing:17.6 kg; r1,2 min.:2.1 mm; D1 ≈:286 mm; Calculation factor Y0:0.63; Calculation factor e:0.86; b:22 mm; Calculation factor kr:0.095; Basic static load rating C0:520 kN; |
| REXROTH DBW10B2-5X/200-6EG24N9K4/V Valves | D:620 mm; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; Grease:6520 kN; d:420 mm; rs (min):5 mm; with tapered bore:700 min-1; Oil:484.880 kN; with cylindrical bore:560 min-1; B:150 mm; |
| REXROTH 4WE6D7X/OFHG24N9K4/B10 Valves | Cap bolt:2 x 1/2-13 UNC; PG:1/8 NPT; Bearing:22312 E; N1:19.05 mm; S:4.763 mm; da:60 mm; dc:57.15 mm; H2:30.163 mm; Taconite seal (dc shaft position):TER 33; L:285.75 mm; |