| 96925/96140CD Timken Tapered Roller Bearing | Dw:4 mm; r1,2 min.:0.3 mm; r2 max.:1 mm; Mass needle roller:3.93 g; Lw:39.8 mm; r1 max.:0.8 mm; |
| M271648/M271610D Timken Tapered Roller Bearing | Basic Static Radial Load Rating Co:3150 N; Oil Speed Rating n2:28000 rpm; Grease Speed Rating n1:22000 rpm; Fillet Radius rb:0.10 mm; B:9.00 mm; Fillet Radius ra:0.30 mm; D:32.0000 mm; Basic Dynamic Radial Load Rating C:6050 N; d:15.000 mm; |
| H247548/H247510CD Timken Tapered Roller Bearing | R2:27.94 mm; Cap bolt:2 x 5/8-11 UNC; L:349.25 mm; J min.:263.525 mm; dc:71.425 mm; Labyrinth ring (dc shaft position):LOR 46; RG:3/8 NPT; H1:101.6 mm; PG:1/8 NPT; Appropriate attachment bolt size G:0.75 in; P150°:40.5 kN; Cap bolt recommended tightening torque:298.3 N·m; N1:22.225 mm; Stabilizing ring:SR-18-15; Cap bolt, SAE grade:8; Mass pillow block:24 kg; da:75 mm; P120°:45.4 kN; |
| LM249748/LM249710CD Timken Tapered Roller Bearing | h:49.212 mm; P150°:113 kN; Stabilizing ring:2 x 38151-40; A1:171.45 mm; Max. speed for PosiTrac Plus seal:800 r/min; L:628.65 mm; P120°:127 kN; P180°:133 kN; PG:1/4 NPT; Da:309.999 mm; R1:115.888 mm; End plug (suffix Y):EPR 21; RG:3/4 NPT; Cap bolt:1-8 UNC; Cap bolt recommended tightening torque:1220 N·m; da:184.15 mm; Labyrinth ring:2 x LOR 160; Housing:SSAFS 040 KA; P90°:207 kN; |
| EE101103/101601CD Timken Tapered Roller Bearing | d:45.000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:33200 N; B:19.00 mm; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating Open/Shielded n2:9000 rpm; Grease Speed Rating Open/Shielded n1:7500 rpm; Basic Static Radial Load Rating Co:21600 N; Accessories:Snap-Ring; Grease Speed Rating n1:7500 rpm; Oil Speed Rating n2:9000 rpm; D:85.0000 mm; |
| EE295102/295192CD Timken Tapered Roller Bearing | r1,2 min.:15 mm; d:459.95 mm; b:16.7 mm; F:535 mm; C:600 mm; K:12 mm; Mass bearing:1160 kg; D1 ≈:655 mm; r3,4 min.:6 mm; B:600 mm; Fatigue load limit Pu:2320 kN; α:20 °; Basic dynamic load rating C:14000 kN; D:760 mm; Basic static load rating C0:30500 kN; Calculation factor kr:820; Design variant/feature:BC4.10/W33WI; |
| EE130851/131402D Timken Tapered Roller Bearing | da min.:699 mm; Mass bearing (including seat washer where applicable):62.5 kg; Limiting speed:750 r/min; Basic static load rating C0:4000 kN; Fatigue load limit Pu:57 kN; H:73 mm; r1,2 min.:3 mm; Basic dynamic load rating C:540 kN; ra max.:2.5 mm; Da max.:681 mm; D1 ≈:634 mm; Minimum load factor A:83; D:750 mm; Reference speed:530 r/min; d:630 mm; d1 ≈:746 mm; |
| EE435102/435165CD Timken Tapered Roller Bearing | D:3.8750 in; Basic Dynamic Radial Load Rating C:32500 N; Fillet Radius rb:0.024 in; Grease Speed Rating n1:6400 rpm; Oil Speed Rating n2:11000 rpm; B:0.6875 in; d:2.500 in; Basic Static Radial Load Rating Co:31000 N; Fillet Radius ra:0.06 in; |
| EE130902/131401CD Timken Tapered Roller Bearing | Basic static load rating C0:98 kN; Fatigue load limit Pu:3.7 kN; Static moment stiffness:400 N·m/mrad; D:90 mm; d:35 mm; Basic dynamic load rating C:47.5 kN; N:8.8 mm; Number of attachment bolts:7; ra max.:0.3 mm; d2:49.2 mm; Attainable speed:4300 r/min; H:34 mm; Preload:2750 N; Required attachment bolt size (DIN 912):M8; da min.:45 mm; Angle between holes in outer ring (Pitch) α:45 °; |
| 96900/96140CD Timken Tapered Roller Bearing | Static axial stiffness, preload class C:119 N/µm; r3,4 min.:0.3 mm; ra max.:0.6 mm; Calculation factor f2D:1.08; Mass bearing:0.07 kg; D:47 mm; Static axial stiffness, preload class B:92 N/µm; Basic static load rating C0:5 kN; D2:42.17 mm; Calculation factor f2B:1.02; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; B:12 mm; db max.:31.6 mm; Preload class A GA:60 N; |
| HM743337/HM743310CD Timken Tapered Roller Bearing | Basic static load rating C0:585 kN; G:M 80x4; Specific dynamic load factor K:100 N/mm²; r1 min.:1 mm; d:80 mm; l7 min.:98 mm; dk:105 mm; l2 max.:389 mm; d2 max.:182 mm; B:55 mm; Basic dynamic load rating C:400 kN; l1 min.:147 mm; h:295 mm; Material constant KM:330; C1 max.:48 mm; α:5 °; Mass rod end:14.5 kg; |
| EE737173/737261D Timken Tapered Roller Bearing | b:7.7 mm; D:105 mm; Basic dynamic load rating C:465 kN; Material constant KM:330; da min.:67 mm; da max.:67 mm; r2 min.:1 mm; Specific static load factor K0:500 N/mm²; dk:92 mm; b1:7.7 mm; α:17 °; B:63 mm; Mass plain bearing:2.4 kg; Basic static load rating C0:1560 kN; C:40 mm; Da min.:92 mm; Design (sliding contact surface combination):Steel/steel; Lubricant:Maintenance free &nd; Sealing solution:Triple-lip seals; |
| HM261049/HM261010CD Timken Tapered Roller Bearing | d:85 mm; da max.:94 mm; Reference speed:3800 r/min; rb max.:2.5 mm; Cb min.:6 mm; B:29 mm; Calculation factor Y:1.35; Mass bearing:1.39 kg; Limiting speed:4800 r/min; Dimension series:M 716600; Ca min.:5 mm; Db min.:125 mm; D:130 mm; Fatigue load limit Pu:26 kN; C:24 mm; d1 ≈:107.6 mm; a:29.153 mm; Calculation factor Y0:0.8; Da max.:119 mm; T:30 mm; |
| EE790114/790223D Timken Tapered Roller Bearing | Specific static load factor K0:120 N/mm²; Da min.:855.5 mm; C:280 mm; Design (sliding contact surface combination):Steel/PTFE FRP; r1 min.:3 mm; α:3 °; Specific dynamic load factor K:80 N/mm²; B:335 mm; Lubricant:Maintenance free &nd; da max.:808 mm; rb max.:6 mm; Basic static load rating C0:22400 kN; r2 min.:6 mm; dk:875 mm; Da max.:974 mm; b:35 mm; da min.:766 mm; Sealing solution:-; |
| EE971298/972151D Timken Tapered Roller Bearing | Sealed Speed Rating n3:4900 rpm; D:100.0000 mm; Basic Static Radial Load Rating Co:31000 N; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:8500 rpm; Grease Speed Rating Open/Shielded n1:7000 rpm; Basic Dynamic Radial Load Rating C:55300 N; B:25.00 mm; d:35.000 mm; Fillet Radius ra:1.50 mm; |
| HM266447/HM266410CD Timken Tapered Roller Bearing | H1:152.4 mm; N1:25.4 mm; L:466.725 mm; Appropriate attachment bolt size G:0.875 in; P90°:113 kN; RG:1/2 NPT; Initial grease fill:382.73 g; h:56.356 mm; A2:274.637 mm; J min.:371.475 mm; P150°:68.1 kN; P60°:189 kN; Housing:SAF 030 KA; J1:82.55 mm; Cap bolt recommended tightening torque:1220 N·m; H:287.337 mm; Taconite seal:TER 126; J max.:406.4 mm; H2:60.325 mm; da:133.35 mm; |
| No. | Brand | H | T | b | L | N | F | D | h |
| EE295950/295192D | Timken | - | - | - | 83 mm | - | - | - | - |
| EE234160/234213CD | Timken | - | - | - | - | - | - | 150.0000 mm | - |
| LM961548/LM961511CD | Timken | - | - | - | - | - | - | 110 mm | - |
| EE820085/820161CD | Timken | - | - | - | - | - | - | 200.0000 mm | - |
| EE113089/113171D | Timken | 473.075 mm | - | - | - | - | - | - | 69.85 mm |
| DX418857/DX748779 | Timken | - | - | - | - | - | - | 90.488 mm | - |
| 81606/81963CD | Timken | 100.013 mm | - | - | 174.625 mm | - | - | - | - |
| M268749/M268710D | Timken | - | - | - | - | - | - | 400.0000 mm | - |
| EE130851/131402D | Timken | 73 mm | - | - | - | - | - | 750 mm | - |
| EE130889/131402D | Timken | - | - | - | - | - | - | 110.0000 mm | - |
| HM266449/HM266410CD | Timken | 400.05 mm | - | - | 711.2 mm | - | - | - | 57.15 mm |
| H239640/H239612CD | Timken | - | - | - | - | - | - | 790 mm | - |
| M235149/M235113CD | Timken | - | - | - | - | - | - | 215.0000 mm | - |
| EE231400/231976CD | Timken | - | - | - | - | - | - | 190.0000 mm | - |
| M268749/M268710CD | Timken | - | 17.25 mm | - | - | - | - | 62 mm | - |
| EE234154/234216D | Timken | - | 250.825 mm | - | - | - | - | 711.2 mm | - |
| DX135509/DX371163 | Timken | - | - | - | - | - | - | - | 210 mm |
| M249749/M249710CD | Timken | 157.559 mm | - | - | 285.75 mm | - | - | - | - |
| 93708/93127CD | Timken | - | - | - | - | - | - | 130.0000 mm | - |
| LM742745/LM742710CD | Timken | - | - | - | - | - | - | 25 mm | - |
| M270749/M270720D | Timken | - | - | - | - | - | - | - | - |
| EE971298/972103D | Timken | 338.137 mm | - | - | 558.8 mm | - | - | - | - |
| EE127095/127139D | Timken | - | - | - | - | - | - | 72.0000 mm | - |
| M241547/M241510CD | Timken | - | - | - | - | - | - | - | - |
| 543085/543115D | Timken | - | - | - | - | - | - | 30.0000 mm | - |
| HM262748/HM262710CD | Timken | - | - | - | 558.8 mm | - | - | - | 47.625 mm |
| HM237535/HM237510CD | Timken | - | - | - | - | - | - | 190.0000 mm | - |
| EE275095/275156D | Timken | - | - | - | 679.45 mm | - | - | - | 60.325 mm |
| EE420850/421462XD | Timken | - | 539.747 mm | - | - | - | - | 901.7 mm | - |
67790/67720CD Timken Tapered Roller Bearing Video
Tapered roller bearing 67790-67720CD-TIMKEN - 177.8x247
Tapered roller bearing 67790-67720CD-TIMKEN , dim : Ø int. 177.8 x Ø ext. 247.65 x th. 103.19 mm. SAME DAY SHIPPING. The specialist at your service for
67790 - 67720-B - Timken CAD
Browse Part Number 67790 - 67720-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial in the The Timken Company catalog including Part
Bearing 67790/67720CD+X2S-67790 (Timken) | Size and
Tapered roller bearings 67790/67720CD+X2S-67790 dimensions and specification
67790 - 67720CD - Timken CAD
Browse Part Number 67790 - 67720CD, Tapered Roller Bearings - TDO (Tapered Double Outer) Imperial in the The Timken Company catalog including Part
TIMKEN 67790/67720CD bearings - TIMKEN BEARING
TIMKEN 67790/67720CD bearings,TIMKEN BEARING,SKF BEARINGS FAG BEARINGS NSK BEARINGS NORTH INTERNATIONAL TRADE GROUP LIMITED
TIMKEN 67790/67720CD Double Row Tapered Roller
TIMKEN 67790/67720CD,Bearing type: Double Row Inch Tapered Roller Bearing,Cone Part: 67790,Cup Part:67720CD dimension:177.8x247.65x103.188mm
67790/67720cd - Timken Taper Roller - Quality Bearings
Product: 67790/67720cd | Brand: Timken | Size: 7x9.75x4.0624inches | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
Timken Part Number 67790 - 67720CD, Tapered Roller
Timken Part Number 67790 - 67720CD, Tapered Roller Bearings - TDO (Tapered Double. Outer) Imperial. The configuration of the TDO provides a wide
Timken - 67790-90232 - Motion Industries
Buy Timken Tapered Roller Bearing Full Assemblies 67790-90232 direct from Motion Industries. Your proven ... Timken - 67790-90232 - Tapered Roller Bearing Assembly - 7.0000 in Bore, 9.7500. Print ... NTN 67790/67720CD#04. Tapered